Speed transfers of up to 12GB/min. (200MB/sec.)Supports the most current Flash drive capacities on the market (Over 18TB+).2 Copy Modes: 1. Quick Copy 2. Whole Media Copy2 Data Wiping Modes: Quick Erase and Full Erase.Standalone device, no PC required for operation.
U-Reach Super7-U3 series USB 3.0 duplicator contains groundbreaking technology in the transfer speed. It supports duplication from 6 and up to 41 pcs, and the transfer speed is up to 12 GB/min. Its effortless use means a PC or other software are not required; and no risk of virus infection.
As the copy is done with bit-by-bit copy mode the result will satisfy the user at any time. With the copy & compare function, you can even be 100% sure your new targets are exactly the same as your master.
If you are looking for duplicators with faster copy speeds or higher target numbers, please let us know or check out our other product lines. We'll be happy to point you to a solution that matches your duplication needs.
Our dupliacators are standalone devices. Just plug in the power cord of the system, turn on the unit and start the production.
The unit is operated with the internal Controller with 4 buttons and an LCD display which is very easy to operate.
For all our units U-Reach offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.
Impeccable EfficiencyU-Reach USB3.0 Tower duplicator is capable of copying at 12GB/min (200MB/sec) (Non PC-based). It is specially designed for USB3.0/3.1/3.2 devices, and the real high-speed transmission enables high volume USB pen drives duplication in amazing efficiency.
Copy Modes1. Quick copy (Data & system): Supports Windows (NTFS), FAT16/32/exFAT, Linux (ext2/3/4), and MAC (HFS, HFS+, HFSX).
2. Whole media: Bit-by-bit copy mode which copies exactly like the master device. Supports al proprietary and unknown formats.
2 Sanitization Modes:Quick Erase: Erase HDD index table, and only takes A FEW SECONDS to complete.
Full Erase: Erase the entire device.
| Model | UB3721T | |
| Target | 1-20 | |
| Specifications | Maximum Transfer Speed | 12GB/min. (200MB/sec.) *Actual performance is dependent on USB device's transfer speeds* |
| Capacity | Supports the latest market available capacity Designed support capability over 18TB+. | |
| Operation Type | Stand-alone, FPGA-based operation (Non PC-based) | |
| Supported Languages | English | |
| LCD Display | Backlit Monochrome LCD Display | |
| LEDs | 2 LED (Red/Green) Indicators per port | |
| Control Panel | 4 Push Buttons(▲, ▼, OK, ESC) | |
| Features | Copy Modes | Quick Copy (Systems & Files Copy) |
| Whole Media Copy | ||
| Compare Function | Bit-by-bit data comparison | |
| Sanitization Modes | Quick Erase and Full Erase | |
| Format Functions | Formats device to FAT16 or FAT32 | |
| Compatibilities | Compatible Devices | USB 3.2 / USB 3.1 / USB 3.0 / USB 2.0 / USB 1.1 USB Sticks. |
| Compatible Devices (with required adapter) | SD/MicroSD/CF | |
| Supported Formats | Quick Copy: FAT16/32/exFAT, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac(HFS, HFS+,HFSX) | |
| Whole Media Copy: All Formats, including proprietary formats | ||
| Supported O/S | All (Windows, Mac, Linux, and other stand-alone systems) | |
| Hardware Specifications | Power Supply | 80W~or up (depends on different type of system requirement) |
| Working Temperature | 5°C ~ 45°C (41°F ~ 113°F) | |
| Storage Temperature | -20°C ~85°C (-4°F ~ 185°F) | |
| Working Humidity | 20% ~ 80% | |
| Storage Humidity | 5% ~ 95% | |
| Certifications | FCC, CE, RoHS | |
