SD Tower Series : Combo SD/Micro SD Tower Duplicator 1 to 39
Logo
Back to: SD Tower Series

Combo SD/Micro SD Tower Duplicator 1 to 39

PDFPrint
Super B Series  Combo SD/Micro SD Duplicator 1-39 (SD840T)
Super B Series  Combo SD/Micro SD Duplicator 1-39 (SD840T)
Super B Series  Combo SD/Micro SD Duplicator 1-39 (SD840T)

Super B Series 

Main features of the Combo SD/Micro SD Duplicator 1-39 (SD840BT)

001 vinetaFor all industries require professional flash inspection, data pre-load and sanitization.
001 vinetaSupports the latest market available capacity.
001 vinetaSupports all brands of SD and MicroSD cards.
001 vinetaDesigned support capability up to 2TB.
001 vinetaEmbedded controller design to achieve high copy performance.

2gb pc       

Product Description

The SD tower series from U-Reach is the most economical way to copy SD cards or micro SD cards with a professional duplicator. All SD towers have Combo Slots so you have your own slot for SD and micro SD cards. So we minimize the chance of error through adapters. We used our knowhow from disc duplicator controllers in the past to create this product. It is very easy to use and reliable to make your production safe. Just put your master SD card or micro SD card in the source port and copy to your empty targets.

With the speed of 33MB/sec on each port the unit is faster than most SD cards in the market. So the system is always a lot faster than the used SD devices itself. In the end the SD cards are the bottleneck of your production in many situations.
As the copy is done with bit-by-bit copy mode the result will satisfy the user at any time. With the copy & compare function you can even be 100% sure your new targets are exactly the same as your master.

If there is really the need of copy faster let us know. We will show other products that can match almost every inquiry.

The units work standalone that means there is no need of a PC. Just plug in the powercord of the system, turn on the unit and start the production.
The unit is operated with the internal Controller with 4 buttons and a LCD display which is very easy to operate.

For all our units U-Reach offers free firmware updates so we make sure there is a high compatibility to new chips and controllers in the market.

Features

2gb g

000 vineta Impeccable efficiency

U-Reach SD/MIcroSD Tower  duplicators is capable of copying at 2 GB/m (33MB/sec) Stand alone, FPGA-based operation (Non PC-based).
Dedicated bandwidth enables high volume duplications without speed degradation. 

tw Nzg5

000 vineta Copy modes

1. Quick copy (Data & system): Supports Windows (NTFS), FAT16/62/64 and Linux (ext2/3/4)
2. Whole media: Bit-by-bit copy mode which copies exactly like the master device. Supports al proprietary and unknown formats.

000 vineta Read-Only source port:

There are no options to disable this built-in feature and it is integrated with all U-reach duplicators.

000 vineta Diagnostic Modes:

001 vinetaH3 Test: Only reads to verify the maximum capacity quality. (All data is 100% safe)
001 vinetaH5 Test: Overwrites then reads to verify maximum capacity quality (All data is destroyed)
001 vinetaH6 Test: Same as H% Test, but only in empty sectors/spaces. (All data is 100% safe)

000 vineta 3 sanitization modes

Quick erase, Full erase and DoD erase.

000 vineta Real-Time PC Monitoring

Connection from the USB port to PC displays: writing speeds, operating durations and completed precentages per port..

14784

Specifications

Model SD840BT
Target 1-39
Specifications Maximum Transfer Speed 2GB/min. (33MB/sec.) *Actual performance is dependent on MicroSD transfer speeds*
Capacity Supports the latest market available capacity
Designed support capability up-to 2TB.
Operation Type Stand-alone, FPGA-based operation (Non PC-based)
Supported Languages English or Japanese
LCD Display Backlit Monochrome LCD Display
LEDs 2 LED (Red/Green) Indicators per port
Control Panel 4 Push Buttons(▲, ▼, OK, ESC)
Features Copy Modes Quick Copy (Systems & Files Copy)
Whole Media Copy
Asynchronous Duplication
Compare Function Bit-by-bit data comparison
Diagnostic Modes H3 Test: Read Only (Entire capacity)
H5 Test: Overwrites and Reads (Entire capacity)
H6 Test: Overwrites and Reads (Only empty sectors/spaces)
A2 Fake Picker Test (Quick capacity legitimacy test)
Sanitization Modes Quick Erase, Full Erase, and DoD Erase
Format Functions Formats device to FAT16 or FAT32
Compatibilities Compatible Devices All SD and MicroSD
Supported Formats Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4)
Whole Media Copy: All Formats, including proprietary formats
Supported O/S All (Windows, Mac, Linux, and other stand-alone systems)
Hardware Specifications Power Supply 80W~or up (depends on different type of system requirement)
Working Temperature 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperature -20°C ~85°C (-4°F ~ 185°F)
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Dimensions 41 x 18 x 37 cm
Weight 8.1 kg
Certifications FCC, CE, RoHS
Copyright © 2013 U-Reach Europe Inc. All rights reserved.
Designed by Rebersu.com