.
digital cinema
KV500-DC/KV600-DC-29 Digital Cinema CRU HDD/SSD Expandable Rackmount Duplicator
Clones hard disk data sector by sector.
Supports 9TB or greater hard drive capacity.
Supports SATA revision I/II/III (1.5 / 3.0 / 6.0 Gbps) drives
Supports all major OS: Windows, Linux, RAID, and Other stand-alone systems.
Supports various HDD interfaces: 2.5"/3.5” SATA HDD and SSD.
 
 
 
Other Target Q'ty:
KV500-DC-5 | KV500-DC-11 KV500-DC-17 | KV500-DC-23 | KV500-DC-29
KV500-DC-36

Product Description

This is an expandable CRU Rack-mount Duplicator (4U 19" rack-mount), which can support between 1 to 254 targets CRU HDD

copy simultaneously without speed degradation. It supports the DX115 DC Carrier, and is currently the biggest CUR HDD
duplicator in the market. There is no set up or software installation required and it is simple to hook up with any other KV500-
C or KV600-C unit to become a larger target duplicator.
 
 
Flexibility to expand target without slowing down speed   Supports All Partition Format for Duplication
  Requires only a simple hookup to link each single unit together in order to expand the targets     Easy to install and expand by stacking all the duplicators in a sturdy server cabinet.
 
Impeccable efficiency
 
With up to 8.1GB/m transferring bandwidth, it is the greatest for industrial use. Each SATA interface is independent, no matter how many targets you would like to duplicate, the speed stays the same and doesn’t decline. 8.1GB per minute is far beyond PC-based duplicators.   8.1 GB HDD duplicator speed
 
Supports All Partition Format for Duplication
 
Bit for Bit Duplication copies all kind of data format
Able to proceed Systems & Files Copy, when device is NTFS, FAT16/32/64, Linux(ext2/ext3/ext4), Mac(HFS/ HFS+/ HFSX) format, to greatly reduce copy time.
 
 
4 ways of Sanitization
 
1.Quick Erase: Takes few seconds to complete
2.Full Erase: Erase the complete HDD
3.DoD Erase: Complies with the U.S. Department of Defense's standard of erasing.
 
4.Secure erase: A National Institute of Standards and Technology 800-88 accept technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
 
Event Log
 
The operation info including operating progress, speed, and even the capacity, model name, S/N of HDD are ALL recorded! That means you can look at all the record when you need to track for any issue. It’s so much convenient for trouble shooting, work responsibility clarification, exporting testing report, work management.
Event log report for duplicator
It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)
 
PC-Monitoring
  PC-link is absolutely perfect for MONITORING the work progress during operation. It shows all the information, including writing speed, operation time, percentage of completion, etc. for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC.
   
 
1. It’s able to monitor duplication status from PC while duplicators are connected to it.
  PC LINK for duplicator
   
2. “iSecuLog” shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
  PC LINK for duplicator
   
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by. “Event Log”
  PC LINK for duplicator
   
4. To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
  Event log report for duplicator
   
5. It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)